Home

Facilities

Contact information

People

Patents

Publications

Journal Articles

Conference Papers

Theses and Dissertations

Books

Presentations

Research

Sponsors

Videos

About the ARC

Theses and Dissertations
108. David Campbell, “Conjugate Heat Transfer and Thermo-Structural analysis of the actively cooled multi-stage conical nozzle and Hypersonic Low-Reynolds diffuser of the new ARC-Heated wind tunnel," Masters Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, May 2017.
107. James Grisham, “Numerical and Analytical Study of Curvature Effects in Laminar Shock Wave/Boundary-Layer Interactions ," Doctoral Dissertation, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, May 2017.
106. Ezgihan Baydar, “Numerical Investigation of Vortex Generator Flow Control for External-Compression Inlets, " Doctoral Dissertation, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, May 2017.
105. Ninad Ramesh Kawle, “Total Temperature Measurement at Pulse Detonation Engine Exhaust,” Masters Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, August 2016.
104. Swati Chandran Thirumangalath, “Multiphase flow modeling and analysis of filling process for pulsed detonation engines,” Masters Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, May 2015.
103. Chanrith Suparat, “Numerical Simulations of Transonic Wingtip,” Masters Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, December 2013.
102. Nitesh Karpakala Manjunatha Gupta, “Point measurement of detonation wave propagation using ion gauge,” Masters Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, December 2013.
101. Dibesh D. Joshi, “Unsteady thrust measurement techniques for pulse detonation engines," Doctoral Dissertation, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, July 2013.
100. Rolim, Tiago C., "Investigation of Side Wall Effects on an Inward Scramjet Inlet at Mach Number 8.6", Doctoral Dissertation, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, July 2013.
99.

Wiswall, John D., "Development and Operation of an Integrated Sampling Probe and Gas Analyzer for Turbulent Mixing Studies in Complex Supersonic Flows", Master’s Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, May 2013.

98. Wunnarat Rongrat, “Numerical Study Of Sidewall Filling For Gas-fed Pulse Detonation Engines,” Masters Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, December 2012.
97. Vadassery, Pravin, “Design, Calibration, and Testing of a Force Balance for a Hypersonic Shock Tunnel,” Master’s Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2012.
96. Leamon, Derek, “Characterization of UTA Hypersonic Shock Tunnel,” Master’s Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2012.
95. Ravindran, Prashaanth, “Investigation of Instabilities Affecting Detonation Waves: Improving the Resolution Using Block-Structured Adaptive Mesh Refinement,” Doctoral Dissertation, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2012.
94. Braun, Eric, “New Detonation Concepts for Propulsion and Power Generation,” Doctoral Dissertation, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2012.
93. Werling, Michael, “Static and Dynamic Calibration of a Multi-Component Sidewall Force Balance for  Transonic Ludwieg Tube Wind Tunnel,” Master’s Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2011.
92. Dwarakapally, Shravani, “Filling of Methane/Air Mixture in a Tube for Pulse Detonation Engines,” Master’s Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2011.
91. Swamy, Yashwanth, “Parametric Analysis of a Detonation-Type Turbofan,” Master’s Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2011.
90. Vutthivithayarak, Ronnachai, “Analysis of Pulse Detonation Turbojet Engines,” Doctoral Dissertation, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2011.
89. Sivarai, Amith, “Parametric and Performance Analysis of a Hybrid Pulse Detonation/Turbofan Engine,” Master’s Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2011.
88. Cao, Huan, “Analytical Parametric Cycle Analysis of Continuous Rotating Detonation Ejector-Augmented Rocket Engine,” Master’s Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2011.
87. Chauhan, Monika, “Numerical Analysis of the Interaction Between a Detonation Wave and Compressible Homogenous Isotropic Turbulence,” Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2011.
86. Bellini, Rafaela, “Ideal Cycle Analysis of a Regenerative Pulse Detonation Engine for Power Production,” Doctoral Dissertation, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2010.
85. Shih, Yusi, “Mean Pressure Measurements of Micro-Vortex Generator at Mach 2.5,” Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2010.
84. Pierce, Adam, “Experimental Study of Micro-Vortex Generators at Mach 2.5,” Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2010.
83. Rao, Sushma, “Effect of Friction on the Zel'dovich−von Neumann−Doering to Chapman−Jouguet Transition,” Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2010.
82. Jagadevan, Karthikeyan, “Fiber-Optic Pressure Sensor for Time-of-Flight Measurements in a Detonation Wave,” Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2010.
81. Luthra, Antriksh, “Solution to the Multi Term Boltzman Equation for Plasma Assisted Combustion,” Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2010.
80. Kalidindi, Neelima, “Heat Transfer Analysis of a Pulse Detonation Engine,” Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2009.
79. Jinnala, V. V. Suneel, “Transient Flow Analysis of Filling in Pulse Detonation Engine,” Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2009.
78. Nagarajan, Hari N., “Direct Numerical Simulation of Interaction of Detonation Wave with Homogenous Isotropic Turbulence,” Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2009.
77. Fernandes, John, “Visualizing the Flow Induced by an Air Curtain over a Mannequin using Stereo Particle Image Velocimetry,” Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2008.
76. Ortiz, A. Albert, “Development of Spectral and Wavelet Time-of-Flight Methods for Propagating Shock and Detonation Waves,” Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2008.
75. Braun, Eric M., “Electromagnetic Flow Control: A Review and Experimental Development and Testing of a Compact Actuator,” Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2008.
74. Panicker, Philip K., “The Development and Testing of Pulsed Detonation Engine Ground Demonstrators,” Doctoral Dissertation, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2008.
73. Roberts, Kristen, “Analysis and Design of a Hypersonic Scramjet Engine with a Starting Mach Number of 4.00,” Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2008.
72. Mitchell, Richard R., “Exploratory Studies of Convective Flows Due to Arc Tracking,” Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2007.
71. Dickmann, Dean A., “On the Near Field Mean Flow Structure of Transverse Jets Issuing into a Supersonic Freestream,” Doctoral Dissertation, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2007.
70. Hekiri, Haider, “Parametric Cycle Analysis for Pulse Detonation Engines,” Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2005.
69. Yi, T., “Numerical Study of Chemically Reacting Viscous Flow Relevant to Pulsed Detonation Engines,” Doctoral Dissertation, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2005.
68. Roseberry, Chris, “Arc-heated Gas Flow Experiments for Hypersonic Propulsion Applications,” Doctoral Dissertation, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2005.
67. Satyanand, U. S., “An Experimental Investigation of Ionization of Supersonic Air by a Corona Discharge,” Doctoral Dissertation, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2005.
66. Ravindran, Prashaanth, “Numerical Simulation of Pulse Detonation Phenomena in a Parallel Environments,” Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2005.
65. John, Ajit Geevarghese, "Study of Impact of Blast Wave on Concrete," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2005.
64. Nichols, Justin Tyler, "Cold Flow Tests of a Thrust Augmented Pulse Detonation Rocket Ejector," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2005.
63. Cederbond, W., "Mach Reflection Induced Detonation in a Reactive Flow," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2004.
62. Reddy, N. K. N., "Development and Testing of a Miniature Pulse Detonation Engine," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2004.
61. Panicker, Philip K., "Ionization of Air by Corona Discharge," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2003.
60. Yokomae, T., "Planar Laser-Induced Fluorescence (PLIF) of H2-O2 Combustion," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2003.
59. Gopalan, M., "Instrumentation System Modeling and Error Assessment in Earth Penetrators," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2003.
58. Meyers, J. M., "Performance Enhancements on a Pulsed Detonation Rocket," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2002.
57. Matsumoto, J., "Design and Testing of a Subscale Supersonic Aeropropulsion Wind Tunnel," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 2003.
56. Kim, H., "Numerical Simulation of Transient Combustion Process in Pulse Detonation Wave Engine," Doctoral Dissertation, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1999.
55. Kim, C. H., "Electrical Conductivitiy Measurement in Shock-Induced Detonation," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1999.
54. Liu, Hsuan-Cheng, "Electrical Conductivity Measurement of a High-Pressure Seeded Air Plasma," Doctoral Dissertation, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1998.
53. Sachdev, Abhijit, "Simulation of Flow Field in the UT Arlington Hypersonic Shock Tunnel, " Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1998.
52. Lo, Peter Ping, "Design and Testing of a Detonation Combustion Chamber with Multi-post Side Wall Injection," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1997.
51. Kinnear, Kevin M., "Design, Calibration and Testing of Transient Thin Film Heat Transfer Gauges," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1997.
50. Boonjue, Sarrat Boone, "Arc Heater Performance, Calibration and Data Correlation," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1997.
49. Peeples, Jennifer L., "Experimental Investigation of the Vortex Structure of a Prototype V-22 Blade Tip," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1997.
48. Pistone, Kenneth A., "Surface Pressure Measurements of Hypersonic Transitional Flow Across a Ramp," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1996.
47. Helt, David, "A Computer Program for the Design and Off-Design Performance of an Air Turbo-Rocket (ATR)" Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1996.
46. Bhatt, Jayesh, "Simulation of combustion Chemistry in a Scramjet Engine," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1996.
45. Liu, Xijing, "Microprocessor Control of High-Speed Imaging System," Master's Thesis, Department of Computer Science and Engineering, The University of Texas at Arlington, Arlington, TX, 1996.
44. Burge, Karl R., "Pulse Detonation - Detonation Continuance in Fuel-Air Regions," Master Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1995.
43. Stanley, Steven B., "Experimental Investigation of Factors Influencing the Evolution of a Detonation Wave," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1995.
42. Brannan, Raymond E., Jr., "Vortices Produced by a Rapidly Pitching Airfoil in Steady Flow," Doctoral Dissertation, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1995.
41. Lau, Ka-Man, "Optical Method for Detecting Shock Propagation," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1995.
40. Tan, Boon Hun B., "Optical Velocimetric Method for Determining Precursor Shock Strength in Free-Piston Shock Tube," Master's Thesis, Department of Electrical Engineering, The University of Texas at Arlington, Arlington, TX, 1995.
39. Liu, Hsuan-Cheng, "A Study of Fluid Properties in an Arc Heater Chamber," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1994.
38. Dodson, John M., II, "Propelling High Mass Projectiles Using the Lockheed Fort Worth Company Compressed Gas Gun," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1994.
37. Holcomb, Stephen R., "Performance Effects of Large Radome Mounted Atop a B747-200 Aircraft," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1993.
36. Erol, Hamdi, "An Experimental Investigation of Upper Surface Vortex Flaps on a 60 Degree Delta Wing," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1993.
35. Bigdeli, Behzad, "Hypersonic, Turbulent Viscous Interaction Past an Expansion Corner," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1992.
34. Wu, Tsung-Ju, "Visualization of Stall Characteristics Using the Smoke-Wire Technique," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1992.
33. Bolt, Marvin V., "The Design and Construction of a Negative Lifting Wing for a Sprint Class Race Car," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1992.
32. Fuller, Douglas E., "Hypersonic Flow over a Delta Wing at Mach 8," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1992.
31. Poppen, William A., Jr., "Experimental Investigation of Propulsion-Induced Effects in Hover in and Out of Ground Proximity on the E-7 STOVL Configuration," Master's Thesis, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1992.
30. Chung, Kung-Ming, "Shock Impingement Near Mild Hypersonic Expansion Corners," Doctoral Dissertation, Department of Mechanical and Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1992.
29. Elbers, Wayne K., "Aerodynamic Investigation of Diamond Planforms," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1991.
28. McAdams, Stephen D., "Flow Induced Noise and Vibration of a Cellular Telephone Antenna," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1991.
27. Yake, Bradley G., "Investigation of Forebody Strakes on Aircraft Stability at High Angle of Attack," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1991.
26. Pace, E. Glenn, "An Experimental Investigation of Hypersonic Swept Shock Boundary-Layer Interactions," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1991.
25. Londenberg, William K., "The Effect of Upper Surface Vortex Flap Planform and Deflection on a 60 Degree Delta Wing," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1991.
24. Rath, Curtis B., "Wing Tip Vortex Stagnation Pressure Recovery of Various Tip Shapes," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1991.
23. Young, Shih-Yih, "Development of Calibration and Digital Filtering Procedures for a 5-Component Strain-Gage Balance," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1991.
22. Jeon, Chang Soo, "Experimental Study of a Two-Dimensional Propulsive Wing in a Low Speed Wind Tunnel," Doctoral Dissertation, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1990.
21. Chen, Wen-King, "Visualization of the Flow Around a Pitching Airfoil Using the Smoke-Wire Technique," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1990.
20. Liu, Cheng-Jin, "Preliminary Design of the MHD Accelerator for an Arc-Heated, MHD-Augmented Hypersonic Wind Tunnel," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1990.
19. Chung, Kung-Ming, "Shock-Tube Calibration of a Fast-Response Pressure Transducer," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1989.
18. Engelhardt, Johnnie P., "A Transonic Wind Tunnel Electronic Control Unit and Total Pressure Survey of a Vortex," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1989.
17. Stuessy, W. Scott, "Hypersonic Shock Tunnel Development and Calibration," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1989.
16. Wang, Chun-Min, "Transient Flow Analysis of a Supersonic Ludwieg-Tube Wind Tunnel," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1989.
15. Steinfeld, David E., "The Determination of the Free Stream Temperature of Air in a Shock Tube," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1989.
14. Huang, Singgwo Joe, "A Study of Flow in Shock Tubes," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1988.
13. Pereira, Vernon C.M., "Response of Stagnation Pressure Probe Systems to a Suddenly Applied Pressure," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1988.
12. Nieh, Ting-Wen, "The Propulsive Characteristics of a Cross Flow Fan Installed in an Airfoil," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1988.
11. Kalkoran, Iraj M., "An Experimental Investigation of the Perpendicular Vortex-Airfoil Interaction at Transonic Speeds," Doctoral Dissertation, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1987.
10. Smith, Dudley E., "The Synchronous Injection Ignition Valveless Pulsejet," Doctoral Dissertation, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1987.
9. Bhargava, Ajay V. "Design and Calibration of a Stain Gage Balance," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1987.
8. Ha, Qui Minh, "Flow of Non-Equilibrium Chemically Reacting Gas Mixture in a Hypersonic Nozzle," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1987.
7. Wang, Her-Shing, "The Perpendicular Vortex-Airfoil Interaction," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1986.
6. Pernice, Ciro, "A Two-dimensional Study of a Propulsive Wing," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1986.
5. Lin, Cia-Hong, "A Wind Tunnel Investigation of External Aerodynamics of an Airfoil with an Internal Cross Flow Fan," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1986.
4. Kim, J.M., "An Investigation of the Parallel Blade-Vortex Interaction in a Low Speed Wind Tunnel," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1986.
3. Kim, I.S., "Supersonic Wind Tunnel Design," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1986.
2. Murtugudde, Raghuram G., "Hypersonic Shock Tunnel," Master's Thesis, Department of Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1986.
1. Pass, Clay Q., "A Wake Blockage Correction Method for Small Subsonic Wind Tunnels," Master's Thesis, Department Aerospace Engineering, The University of Texas at Arlington, Arlington, TX, 1986.